NB: PRODUCT IS ONLY SUITABLE FOR HEADLIGHTS MADE OF POLYCARBONATE.<\/p>\n
STEP 1: Oxidation Removal Wipe
\nNOTE: Wipe will evaporate very quickly. Do not open wipe until you are ready to restore a headlight, and work very quickly while wiping. Active ingredients will evaporate within 3\u20135 minutes after opening pouch. Park car in a cool, shady location before treating.
\nAVOID CONTACT WITH PAINTED SURFACES: Use painter\u2019s tape to protect painted surfaces surrounding headlight.<\/p>\n
1. Ensure headlight is clean and dry.
\n2. Open a \u201cSTEP 1 CLEAN\u201d sachet and remove wipe. Keep wipe folded to reduce evaporation.
\n3. Scrub headlight with firm, even pressure in a horizontal back-and-forth motion. You will notice the oxidation residue beginning to be removed.
\n4. Turn the wipe to a clean side, keeping the wipe folded.
\n5. Continue to wipe, turning wipe to clean section as needed until no residue is visible on wipe. Discard wipe.
\nNOTE: Though your headlight may appear clear additional deep cleaning could be necessary to ensure all oxidation is removed.<\/p>\n
6. Repeat 1\u20135 on the other headlight.<\/p>\n
STEP 2: UV Sealant Protection Wipe
\n1. Ensure that both headlights have been cleaned with the Oxidation Removal Wipe and that surface is dry before applying sealant. For best results, first wipe surface with a clean, lint-free towel.
\n2. Open a \u201cSTEP 2 PROTECT\u201d sachet and pull out wipe.
\n3. Apply to the headlight surface by wiping in one direction, similar to applying a coat of paint. Repeat on second headlight. One wipe should coat two headlights.
\n4. Let surface dry completely. Surface will be dry to touch in about 3 hrs. Do not touch surface and avoid contact with water until dry.<\/p>\n
NOTE: Drying time after step 3 is dependent upon weather conditions. Drying may take longer in lower temperatures or higher humidity.<\/p>\n
NOTE: Not for personal cleansing. Dispose of the wipes in bin. Do not flush<\/p>\n
Attention
\nArmor All\u00ae Headlight Restorer Wipes kit is only suitable for headlights made of polycarbonate. Avoid contact with painted surfaces. Use painter’s tape to protect painted surfaces surrounding headlight. Not for personal cleansing. Dispose of the wipes in bin. Do not flush.
\nFor best results
\nPark car in a cool, shady location before treating. It is important to clean both headlights with the Step 1 Clean Wipes prior to opening the Step 2 Protect Wipe and treating the headlights.<\/p>\n